This power distribution board is designed for power distribution from a battery in a beetle weight combat robot (1.36kg) .
This board can provide up to 4 ESCs a combined 30A of constant current at a maximum of 24V.
Also included is a inbuilt linear voltage regulator providing a constant 5V output to power the receiver, LED and auxiliary components.
Kit comes with all headers and XT-30 connectors required to populate the board.
Additional headers are also provided for the auxiliary outputs and receiver socket.
(Connected devices will require there own mating XT-30 connector.)
3 LEDs are also included in this kit that have a resistor per-soldered making them appropriate for 5V use.
Red, green and blue LEDs are included.
Receiver included with this kit is compatible with the Flysky i6 Controller.
Rails on the back of the board allow for additional current carrying capacity through the PCB, it is recommended to fill these traces once the board is populated for best performance.
Included:
1 x Power distribution PCB
5 x XT-30 Female Connector
1 x XT-30 Male Connector
4 x 4-Pin 2.54mm Pitch Header.
1 x 3-pin 2.54mm Pitch Header.
1 x FS2A-4CH Receiver.
Size: 47 x 41 x 12
Weight: 13.5g
Max Voltage: 24V
Max Constant Current: 30A
LED Wire Length: 200mm
LED Colour: 1 x Red, 1 x Green, 1 x Blue
ESC Power Outputs: 4
Regulated voltage output: 5V
Max Regulated Current: 200mA